DIAGNOSTIC PROCEDURE
DTC B110E, B110F, B2856, B2886, B2887 DIAGNOSTIC PROCEDURE
POSSIBLE
CAUSE
z
Crash zone sensor misinstalled with wrong sensor
z
Driver-side side air bag sensor No.1 misinstalled with wrong sensor
z
Passenger-side side air bag sensor No.1 misinstalled with wrong sensor
z
Driver-side side air bag sensor No.2 misinstalled with wrong sensor
z
Passenger-side side air bag sensor No.2 misinstalled with wrong sensor
STEP
INSPECTION
ACTION
1
INSPECT EACH SENSOR FOR
INSTALLATION POSITION
z
Turn the ignition switch to the LOCK
position.
z
Disconnect the negative battery cable and
wait for
1 min or more.
z
Verify that the crash zone sensor or side air
bag sensor is installed in the correct
position.
z
Is each sensor installed correctly?
WARNING:
z
Handling the air bag system components
improperly can accidentally deploy the air
bag modules and pre-tensioner seat
belts, which may seriously injure you.
Read the service warnings and cautions
before handling the air bag system
components.
(See AIR BAG SYSTEM SERVICE
WARNINGS .)
(See AIR BAG SYSTEM SERVICE
CAUTIONS .)
Yes Go to the next step.
No
Install the each sensor correctly, then go to
the next step.
2
INSPECT SAS CONTROL MODULE
z
Connect the negative battery cable.
z
Turn the ignition switch to the ON position.
z
Are DTCs B110E, B110F, B2856, B2886
and/or B2887 indicated?
Yes
Replace the SAS control module. (See
SAS CONTROL MODULE
REMOVAL/INSTALLATION
.)
No
DTC troubleshooting completed.
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:47 AM
Page 68
© 2005 Mitchell Repair Information Company, LLC.
