NOT REUSING WINDSHIELD
1. Cut out the sealant all around the glass using a sealant remover.
2. Remove the windshield.
Fig. 29: Cutting Sealant Around Glass
Courtesy of MAZDA MOTORS CORP.
REUSING WINDSHIELD
1. Avoiding the pin on the inside of the vehicle, insert the piano wire which has been cut to sufficient length.
2. Wind each end of the piano wire around a bar.
Courtesy of MAZDA MOTORS CORP.
NOTE:
z
For the areas of the sealant that are difficult to cut, use the piano wire and
follow the procedure under "Reusing Windshield".
WARNING:
z
Using the piano wire with bare hands can cause injury. Always wear
gloves when using the piano wire.
NOTE:
z
Before removing the windshield from the body, mark the position of the
windshield by affixing tape to the windshield and body panel.
NOTE:
z
Use a long sawing action to spread the work over the whole length of
the piano wire to prevent it from breaking due to localized heating.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:36:16 AM
Page 23
© 2005 Mitchell Repair Information Company, LLC.
