USING M-MDS
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
1. Select "Electrical".
z
When using the PDS (Pocket PC)
1. Select "All Tests and Calibrations".
3. Then, select items from the screen menu in the following order.
1. Select "Rain Sensor Reset".
4. Perform the procedure as indicated on the screen.
Fig. 40: Identifying Data Link Connector
Courtesy of MAZDA MOTORS CORP.
CAUTION:
z
If the operation is too fast, the windshield wiper switch position
cannot be detected and the initial setting may not be performed.
Operate the windshield wiper switch for one cycle (AUTO--
>OFF-->AUTO) per 1 s.
NOTE:
z
When the initial setting is performed correctly, the windshield wiper
operates once at low speed.
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Wiper/Washer System - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:35:20 AM
Page 29
© 2005 Mitchell Repair Information Company, LLC.
