10. Using a flathead screwdriver, remove the snap ring from the counter drive gear.
Fig. 148: Removing Snap Ring From Counter Drive Gear
Courtesy of MAZDA MOTORS CORP.
Assembly Procedure
1. Using the
SST
and a press, install the tapered roller bearing to the center support.
Substitution SST
z
49 L033 101
NOTE:
z
The tapered roller bearing cannot be removed from the center
support.
z
The tapered roller bearing and center support must be replaced as a
set.
Fig. 149: Identifying Tapered Roller Bearing And Center Support
Courtesy of MAZDA MOTORS CORP.
NOTE:
z
The tapered roller bearing and bearing race outer must be replaced as a
set.
2008 Mazda CX-9 Grand Touring
2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Microsoft
Sunday, November 15, 2009 10:28:16 AM
Page 77
© 2005 Mitchell Repair Information Company, LLC.
