3. Select "DataLogger".
3. Select the applicable PID from the PID table.
4. Verify the PID data according to the directions on the screen.
Fig. 4: Identifying DLC-2 Location
Courtesy of MAZDA MOTORS CORP.
PID/DATA MONITOR TABLE [POWER LIFTGATE (PLG) SYSTEM]
PID/DATA MONITOR CHART
NOTE:
z
The PID data screen function is used for monitoring the calculated
value of input/output signals in the module. Therefore, if the
monitored value of the output parts is not within the specification, it
is necessary to inspect the monitored value of input parts
corresponding to the applicable output part control. In addition,
because the system does not display an output part malfunction as
an abnormality in the monitored value, it is necessary to inspect the
output parts individually.
PID name
(definition)
Unit/Condition
Operation Condition (Reference)
Terminal
DTC_CNT
(Number of
continuous DTCs)
-
Indicates number of DTC
-
LAT_FULL
(Liftgate latch and
lock actuator (full
latch switch))
Off / On
z
Full latch switch on: on
z
Other: off
3G
LAT_HALF
(Liftgate latch and
lock actuator (half
latch switch))
Off / On
z
Half latch switch on: on
z
Other: off
3H
LAT_RTN
(Liftgate latch and
z
Return switch on: on
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES On-Board Diagnostic (Power Liftgate (PLG) System) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:46:08 AM
Page 5
© 2005 Mitchell Repair Information Company, LLC.
