Fig. 124: Placing SST On Clutch Balancer
Courtesy of MAZDA MOTORS CORP.
4. Remove the snap ring using snap ring pliers.
5. Remove the clutch balancer, return spring and the retainer from the C1 clutch drum.
Fig. 125: Identifying Clutch Balancer, Return Spring And Retainer
Courtesy of MAZDA MOTORS CORP.
6. While pushing the C1 clutch piston by hand, apply compressed air into the oil passage as shown in the
figure and remove the forward clutch piston from the C1 clutch drum.
Air pressure 392 kPa {4.0 kgf/cm
2
, 57 psi}
CAUTION:
z
Do not damage the seal on the clutch balancer.
NOTE:
z
When applying compressed air, block the one oil passage of the C1
clutch drum as shown in the figure.
2008 Mazda CX-9 Grand Touring
2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Microsoft
Sunday, November 15, 2009 10:28:16 AM
Page 64
© 2005 Mitchell Repair Information Company, LLC.
