10. Return to the Step 3.
11. After verifying that the PATS function menu is displayed again on the M-MDS screen, select the "Exit
(From This Menu)" to finish the M-MDS procedure.
12. After Step 11, wait
5 s or more
and then turn the ignition switch to the LOCK position.
13. Disconnect the M-MDS from the DLC-2.
14. Verify that the all keys can start the engine for
5 s or more
after the procedure.
NO.3 KEY REPLACEMENT PROCEDURE (CLEARING PREVIOUSLY PROGRAMMED KEY ID
NUMBERS, KEY RE-PROGRAM)
Conditions
z
Have two or more keys to be programmed after the key ID number clearing.
Procedure
Fig. 101: Key Replacement Procedure
Courtesy of MAZDA MOTORS CORP.
1. Prepare two or more keys to be programmed after the key ID number is cleared.
2. Connect the M-MDS to the DLC-2. (See
M-MDS CONNECTING PROCEDURE
.)
3. Using key 1, turn the ignition switch to the ON position.
4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
Select "Body".
Select "Security".
z
When using the PDS (Pocket PC)
Select "Programming".
5. Then, select items from the screen menu in the following order.
NOTE:
z
Although the security light starts flashing and DTC 15 is displayed
after approx. 1 min, this does not indicate an improper procedure.
Continue to perform the procedure as indicated.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:59 AM
Page 87
© 2005 Mitchell Repair Information Company, LLC.
