Fig. 17: Identifying Shaft Splines With Tape
Courtesy of MAZDA MOTORS CORP.
DYNAMIC DAMPER ASSEMBLY NOTE
1. Install the dynamic damper as shown in the figure.
Standard length 290.7-298.7 mm {11.45-11.75 in}
2. Install the new boot band onto the dynamic damper.
Fig. 18: Identifying Dynamic Damper Assembly Length
Courtesy of MAZDA MOTORS CORP.
BOOT ASSEMBLY NOTE
1. Fill the boot (wheel side) with the specified grease.
Grease amount 110-130 g {3.89-4.58 oz}
2. With the splines of the shaft still wrapped in tape from disassembly, install the boot.
NOTE:
z
The wheel side and transaxle side boots are different.
CAUTION:
z
Do not touch grease with your hand. Apply it from the tube to
prevent foreign matter from entering the boot.
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:57 AM
Page 11
© 2005 Mitchell Repair Information Company, LLC.
