DTC B1046, B2773, B2774, B2775, B2776
DTC B1046, B2773, B2774, B2775, B2776 DETECTION CONDITION AND POSSIBLE CAUSE
seat?
3
INSPECT FLOOR
z
Visually inspect the
installation parts of the
front passenger-side seat
for the following:
{
Abnormal floor
deformation
{
Installation hole of
front passenger-side
seat is improperly
positioned
z
Is the floor normal?
Yes Go to the next step.
No
Repair floor deformation.
z
After repair, perform seat weight sensor calibration
and reperform the DTC inspection. If the DTC is
displayed even though the floor has been repaired, go
the next step. (See
SEAT WEIGHT SENSOR
CALIBRATION
.)
4
INSPECT SEAT WEIGHT
SENSOR CONTROL
MODULE
z
Replace the seat weight
sensor.
z
After replacement,
perform seat weight sensor
calibration. (See
SEAT
WEIGHT SENSOR
CALIBRATION
.)
z
Reperform the DTC
inspection.
z
Is DTC B1013 indicated?
Yes
Replace the seat weight sensor control module. (See
SEAT
WEIGHT SENSOR CONTROL MODULE
REMOVAL/INSTALLATION
.)
z
After replacement, perform seat weight sensor
calibration and reperform the DTC inspection. If the
DTC is displayed even though the seat weight sensor
control module has been replaced, replace the SAS
control module. (See
SAS CONTROL MODULE
REMOVAL/INSTALLATION
.)
No
DTC troubleshooting completed.
DTC
B1046 Driver-side curtain air bag module and other air bag module circuits short
B2773 Driver-side curtain air bag module circuit resistance low
B2774 Driver-side curtain air bag module circuit resistance high
B2775 Driver-side curtain air bag module circuit short to body ground
B2776 Driver-side curtain air bag module circuit short to power supply
DETECTION
CONDITION
WARNING:
z
Detection conditions are for understanding the DTC outline before performing an
inspection. Performing an inspection according to only the detection conditions
may cause injury due to an operating error, or damage the system. When
performing an inspection, always follow the inspection procedure.
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:46 AM
Page 18
© 2005 Mitchell Repair Information Company, LLC.