2. Disconnect the pressure pipe from the steering gear and linkage, and connect the
SSTs.
Tightening torque 29.4-44.1 N.m {3.00-4.49 kgf.m, 21.7-32.5 ft.lbf}
Fig. 3: Identifying SSTs
Courtesy of MAZDA MOTORS CORP.
3. Bleed the air from the system. (See
AIR BLEEDING
.)
4. Open the gauge valve fully.
5. Start the engine and turn the steering wheel fully left and right to raise the fluid temperature to
50-60 °C
{122-140 °F}.
6. Close the gauge valve completely.
7. Increase the engine speed to
1,000-1,500 rpm
and measure the fluid pressure generated by the oil pump.
z
If the pressure is not within the specification, repair or replace the oil pump component.
Oil pump fluid pressure 11.3-11.8 MPa {116-120 kgf/cm
2
, 1639-1711 psi}
CAUTION:
z
If the valve is left closed for more than 5 seconds, the fluid
temperature will rise excessively and adversely affect the oil
pump.
Fig. 4: Measuring Fluid Pressure Generated By Oil Pump
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 STEERING Power Steering - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:20:34 AM
Page 3
© 2005 Mitchell Repair Information Company, LLC.
