Spacer thickness
SPACER THICKNESS SPECIFICATION
10. Assemble the spacer selected for the pinion height adjustment to the drive pinion.
11. Press the bearing inner race (rear bearing) into the drive pinion using the
SSTs
and a press.
Substitution SST
z
49 V001 525
Outer diameter: 37.2-50.3 mm {1.47-1.98 in}
Inner diameter: 35.2 mm {1.39 in} or more
Inner depth: 134.3 mm {5.29 in} or more
Plate thickness: 1 mm {0.04 in} or more
Replace with a spacer 0.03 mm {0.001 in} thicker than the currently
used one. Spacer thickness is set at 0.015 mm {0.0006 in}
increments, therefore select the closest spacer thickness and
assemble.
z
Install the spacer with the chamfer on the SST side.
Identification mark Thickness (mm {in}) Identification mark Thickness (mm {in})
08
3.08 {0.1213}
29
3.29 {0.1295}
09
3.095 {0.1219}
30
3.305 {0.1301}
11
3.11 {0.1224}
32
3.32 {0.1307}
12
3.125 {0.1230}
33
3.335 {0.1313}
14
3.14 {0.1236}
35
3.35 {0.1319}
15
3.155 {0.1242}
36
3.365 {0.1325}
17
3.17 {0.1248}
38
3.38 {0.1331}
18
3.185 {0.1254}
39
3.395 {0.1337}
20
3.20 {0.1260}
41
3.41 {0.1343}
21
3.215 {0.1266}
42
3.425 {0.1348}
23
3.23 {0.1272}
44
3.44 {0.1354}
24
3.245 {0.1278}
45
3.455 {0.1360}
26
3.26 {0.1283}
47
3.47 {0.1366}
27
3.275 {0.1289}
-
-
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Differential - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:52:16 AM
Page 26
© 2005 Mitchell Repair Information Company, LLC.
