INSTRUMENT CLUSTER CONFIGURATION
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
1. Select "Module Programming".
3. Select "Programmable Module Installation".
4. Select "IC" and perform procedures according to directions on the M-MDS screen.
z
If odometer data is to be transferred to a new instrument cluster, perform the following procedure:
1. Select "Programmable Parameters" from the menu.
CAUTION:
z
The removed instrument cluster should be placed with the
display side up to prevent grease from leaking from the meters.
Fig. 3: Identifying Proper Position Of Instrument Cluster Display
Courtesy of MAZDA MOTORS CORP.
NOTE:
z
Use the IDS (laptop PC) because the PDS (Pocket PC) does not support
the INSTRUMENT CLUSTER CONFIGURATION.
z
If all the following conditions are met, the odometer data (total traveled
distance) in the previous instrument cluster is automatically transferred to
a new instrument cluster during the configuration. If any of the conditions
are not met, odometer-data transfer cannot be performed.
Previous instrument cluster
{
No malfunction (Configuration data can be read using the M-MDS.)
New instrument cluster
{
Odometer display is less than 100 km
{
Odometer has no malfunction
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Instrumentation/Driver Info - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:42:26 AM
Page 3
© 2005 Mitchell Repair Information Company, LLC.
