3. Drain the ATF. (See
AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT [AW6A-EL,
AW6AX-EL]
.)
4. Remove in the order shown in the figure.
5. Install in the reverse order of removal.
6. Add ATF to the specified level. (See
AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT
[AW6A-EL, AW6AX-EL]
.)
7. Perform the mechanical system test. (See
MECHANICAL SYSTEM TEST [AW6A-EL, AW6AX-
EL]
.)
LINE PRESSURE TEST REFERENCE
WARNING:
z
Improperly jacking a transaxle is dangerous. It can slip off the
jack and may cause serious injury.
CAUTION:
z
To prevent the torque converter and transaxle from separating,
remove the transaxle without tilting it toward the torque
converter.
Service item
Test item
Line pressure test Stall test Time lag test Time lag test
ATX replacement
X
ATX overhaul
X
X
X
X
Torque converter replacement
X
X
Oil pump replacement
X
Control valve body component
X
Clutch system replacement
X
X
X
X : Test to be performed after the service work
2008 Mazda CX-9 Grand Touring
2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:29:31 AM
Page 50
© 2005 Mitchell Repair Information Company, LLC.
