Fig. 94: Keyless Control Module Replacement Procedure
Courtesy of MAZDA MOTORS CORP.
1. Prepare two or more keys to be programmed after the key ID number is cleared.
2. Connect the M-MDS to the DLC-2. (See
M-MDS MENU
.)
3. Using key 1, turn the ignition switch to the ON position.
4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
Select "Body".
Select "Security".
z
When using the PDS (Pocket PC)
Select "Programming".
5. Then, select items from the screen menu in the following order.
z
Select "PATS Functions".
6. Select "Parameter Reset" from the M-MDS screen menu and perform the procedure according to the M-
MDS screen
7. Perform the security access according to the directions on the M-MDS screen. (See
SECURITY
ACCESS PROCEDURE
.)
8. Select the replaced parts according to the directions on the M-MDS.
z
If the keyless control module is replaced: Select "SKE".
NOTE:
z
Although the security light starts flashing and DTC 15 or DTC 23 is
displayed after approx. 1 min, this does not indicate an improper
procedure. Continue to perform the procedure as indicated.
NOTE:
z
At this time, do not select the other parts from the M-MDS menu.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:59 AM
Page 74
© 2005 Mitchell Repair Information Company, LLC.
