MECHANICAL SYSTEM TEST PREPARATION
1. Engage the parking brake and use wheel chocks at the front and rear of the wheels.
2. Inspect the engine coolant level. (See
COOLING SYSTEM SERVICE WARNINGS [MZI-3.7]
.) (See
ENGINE COOLANT LEVEL INSPECTION [MZI-3.7]
.)
3. Inspect the engine oil level. (See
ENGINE OIL LEVEL INSPECTION [MZI-3.7]
.)
4. Inspect the ATF level. (See
AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION [AW6A-EL,
AW6AX-EL]
.)
5. Inspect the idle speed. (See
ENGINE TUNE-UP [MZI-3.7]
.)
6. Inspect the ignition timing. (See
ENGINE TUNE-UP [MZI-3.7]
.)
LINE PRESSURE TEST
1. Perform mechanical system test preparation. (See
MECHANICAL SYSTEM TEST PREPARATION
.)
2. Connect the
SSTs (49 HD64 406A and, 49 0378 400C)
to the line pressure inspection port and replace
the gauge of the
SST (49 0378 400C)
with the
SST (49 B019 901B)
.
Fig. 2: Identifying Line Pressure Inspection Port With SST
Courtesy of MAZDA MOTORS CORP.
WARNING:
z
Removing the test plug when the ATF is hot can be dangerous.
Hot ATF can come out of the opening and badly burn you.
Before removing the test plug, allow the ATF to cool.
2008 Mazda CX-9 Grand Touring
2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:29:30 AM
Page 3
© 2005 Mitchell Repair Information Company, LLC.
