11. Install the C1 clutch component on the input shaft and set a dial indicator as shown in the figure.
12. Apply compressed air as shown in the figure and measure the C1 clutch piston stroke.
Air pressure 200 kPa {2.0 kgf/cm
2
, 29 psi}
C1 clutch piston stroke 1.2-1.4 mm {0.047- 0.055 in}
z
If not within the specification, select an appropriate retaining plate.
Fig. 138: Applying Compressed Air And Measuring C1 Clutch Piston Stroke.
Courtesy of MAZDA MOTORS CORP.
RETAINING PLATE SIZE
Fig. 137: Installing Snap Ring In Groove
Courtesy of MAZDA MOTORS CORP.
Identification mark
Thickness (mm {in})
1
2.8 {0.110}
2
2.9 {0.114}
3
3.0 {0.118}
4
3.1 {0.122}
A
3.15 {0.124}
5
3.2 {0.126}
2008 Mazda CX-9 Grand Touring
2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Microsoft
Sunday, November 15, 2009 10:28:16 AM
Page 71
© 2005 Mitchell Repair Information Company, LLC.
