9. If programming more card keys, remove the supplementary key once, and then repeat the procedure by
following the instructions on the M-MDS screen.
CLEARING CARD KEY [ADVANCED KEYLESS SYSTEM]
1. Fully lower the driver-side door glass.
2. Connect the M-MDS to the DLC-2.
3. Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.
4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
1. Select "Body".
2. Select "Security".
z
When using the PDS (Pocket PC)
1. Select "Programming".
5. Then, select items from the screen menu in the following order.
1. Select "PATS Functions".
2. Select "Card Key Code Erase and Program".
6. Security access begins and the M-MDS displays the "OUT-CODE".
NOTE:
z
After Step 8 is completed and the card key is programmed, the door
lock actuator operates to lock, and then operates to unlock.
CAUTION:
z
Protect the cable and body contact area with a clean rag,
otherwise they could be damaged.
Fig. 61: Identifying DLC-2 Location
Courtesy of MAZDA MOTORS CORP.
NOTE:
z
When "OUT-CODE" is first displayed, turning the ignition switch from
the LOCK to the ON position 5 times will change the "OUT-CODE".
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:58 AM
Page 40
© 2005 Mitchell Repair Information Company, LLC.
