NO.3 DOOR GLASS DOES NOT OPERATE USING THE REQUEST SWITCH
[POWER WINDOW SYSTEMS (EXTERIOR OPEN/CLOSE FUNCTION)]
POSSIBLE CAUSE CHART
DIAGNOSTIC PROCEDURE
DIAGNOSTIC PROCEDURE
3
z
Is the reason why they do not
lock/unlock because the key is
inserted in the steering lock?
No
Go to the next step.
4
z
When the lock/unlock operation does
not operate for reasons other than the
above Steps 2 and 3.
Yes
Inspect the following parts, and repair or replace.
z
Keyless control module
(See
KEYLESS CONTROL MODULE
INSPECTION [ADVANCED KEYLESS
SYSTEM]
)
z
Wiring harness between keyless control
module and BCM.
No
Reinspect for malfunction recurrence. If the
malfunction is not corrected, repeat the procedure
from Step 1.
3
Door glass does not operate using the request switch
POSSIBLE
CAUSE
z
Keyless control module malfunction
z
BCM malfunction
z
Open circuit in wiring harness between request switch and keyless control
module.
z
Any door or liftgate is open.
z
Key is inserted in steering lock.
z
Start knob is in a position other than LOCK position.
Step
Inspection
Action
1
z
Verify the door lock/unlock operation
by operating the request switch.
z
Does it operate normally?
Yes
Inspect the following parts, and repair or replace.
z
Keyless control module
(See
KEYLESS CONTROL MODULE
INSPECTION [ADVANCED KEYLESS
SYSTEM]
.)
z
BCM
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Symptom Troubleshooting [Power Window System (Exterior Open/Close Function)] -
Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:37:40 AM
Page 5
© 2005 Mitchell Repair Information Company, LLC.
