8. When essentially no fuel is being discharged, stop the fuel pump.
9. Disconnect the negative battery cable. (See
BATTERY REMOVAL/INSTALLATION [MZI-3.7]
.)
10. Remove the presilencer. (See
EXHAUST SYSTEM REMOVAL/INSTALLATION [MZI-3.7]
.)
11. To remove the fuel pump unit, remove the following parts:
1. Second-row seat (LH) (See
SECOND-ROW SEAT REMOVAL/INSTALLATION
.)
2. Edge cover (See
LONG SLIDER REMOVAL/INSTALLATION
.)
3. Long slider cover (See
LONG SLIDER REMOVAL/INSTALLATION
.)
4. Rear heat duct No.3 (See
REAR HEAT DUCT COMPONENT
REMOVAL/INSTALLATION
.)
5. Fuel pump unit (See
FUEL PUMP UNIT REMOVAL/INSTALLATION [MZI-3.7]
.)
12. Siphon the fuel from the fuel tank.
13. Remove in the order indicated in the table.
14. Install in the reverse order of removal.
15. Complete the "AFTER SERVICE PRECAUTION". (See
AFTER SERVICE PRECAUTION [MZI-
3.7]
.)
CAUTION:
z
The fuel pump could be damaged if it is operated (fuel
pump idling) while there is no fuel in the fuel tank. Verify
the amount of fuel being discharged from the hose and
stop operation of the fuel pump when essentially no fuel is
being discharged.
Fig. 14: Identifying Main Fuse Block (Fuel Pump Relay)
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Fuel System (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:04:45 AM
Page 12
© 2005 Mitchell Repair Information Company, LLC.
