2. Connect the M-MDS to the DLC-2. (See
M-MDS CONNECTING PROCEDURE
.)
3. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
Select "Body".
Select "Security".
z
When using the PDS (Pocket PC)
Select "Programming".
4. Then, select items from the screen menu in the following order.
1. Select "PATS Functions".
5. Select "Customer Spare Key Programming Enable" or "Customer Spare Key Programming Disable" from
the M-MDS screen menu. Additional key programming procedure is as follows according to the selected
menu:
ADDITIONAL KEY REGISTRATION METHOD
6. Perform the security access according to the directions on the M-MDS screen. (See
SECURITY
ACCESS PROCEDURE
.)
7. After verifying that the PATS function menu is displayed again on the M-MDS or equivalent screen,
select "Exit (From This Menu)" to finish the M-MDS procedure.
8. After Step 7, wait 5 s or more and then turn the ignition switch to the LOCK position.
9. Verify that the all keys can start the engine for
5 s or more
after the procedure.
NO.5 RESETTING PROCEDURE FOR THE IMMOBILIZER SYSTEM WHEN REPLACING THE
INSTRUMENT CLUSTER REPLACEMENT
Conditions
z
Have two or more keys to be programmed after the key ID number clearing.
NOTE:
z
Although the security light starts flashing and DTC 15 is displayed
after approx. 1 min, this does not indicate an improper procedure.
Continue to perform the procedure as indicated.
Setting
Additional key registration method
Procedure using two valid
keys
Procedure using the M-
MDS
Customer spare key programming enable
X
X
Customer spare key programming
disable
-
X
x. Procedure is possible
-. Procedure is not possible
CAUTION:
z
Before starting Step 1, complete the procedure for the
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:59 AM
Page 89
© 2005 Mitchell Repair Information Company, LLC.
