2. Turn the crankshaft clockwise to remove the power steering oil pump drive belt.
3. Install the power steering oil pump drive belt.
1. Install the
SST
according to the following steps.
1. Loosen the clamp adapter nut of the
SST.
2. Position the
SST
on the power steering oil pump pulley with the clamp adapter in one of the
holes of the pulley.
3. Tighten the clamp adapter nut by hand.
2. Position the power steering oil pump drive belt around the
SST
and the power steering oil pump
Courtesy of MAZDA MOTORS CORP.
NOTE:
z
If there is power steering oil pump drive belt damage and
cracks, replace the power steering oil pump drive belt.
NOTE:
z
There is no need to remove the clamp adapter nut
completely when positioning the SST on the power
steering oil pump pulley.
NOTE:
z
Hand tightening of the clamp adapter nut is sufficient.
Fig. 7: Positioning SST On Power Steering Oil Pump Pulley
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:01:56 AM
Page 8
© 2005 Mitchell Repair Information Company, LLC.
