DTC P060A, P060C, P060F, P061D [MZI-3.7]
DTC P060A, P060C, P060F, P061D (MZI-3.7) DETECTION CONDITIONS AND POSSIBLE CAUSES
DIAGNOSTIC PROCEDURE
DTC P060A, P060C, P060F, P061D (MZI-3.7) DIAGNOSTIC PROCEDURE
DTC P060A
P060A: Internal control module monitoring processor performance
DTC P060C
P060C: Internal control module main processor performance
DTC P061D
P061D: Internal control module engine air mass performance
DETECTION CONDITION
z
Indicates an error occurred in the PCM.
POSSIBLE CAUSE
z
Software incompatibility issue
z
PCM malfunction
STEP
INSPECTION
ACTION
1
VERIFY FREEZE FRAME DATA HAS
BEEN RECORDED
z
Has FREEZE FRAME DATA been
recorded?
Yes Go to the next step.
No Record FREEZE FRAME DATA on the repair
order, then go to the next step.
2
VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
z
Verify related Service Bulletins and/or
on-line repair information availability.
z
Is any related Service Bulletins
available?
Yes
Perform repair or diagnosis according to the
available Service Bulletins.
z
If the vehicle is not repaired, go to the
next step.
No
Go to the next step.
3
INSPECT PCM FOR LATEST
CALIBRATION
z
Program the PCM to the latest
calibration.
z
Turn the ignition switch off.
z
Perform the KOEO self-test.
z
Turn the ignition switch off.
z
Perform the KOER self-test.
z
Use the customer information to
recreate the concern.
z
Perform the self-test.
z
Are DTCs P060A, P060C or P060D
present?
Yes Go to the next step.
No
Go to Step 5.
INSPECT FOR CORRECT PCM
OPERATION
2008 Mazda CX-9 Grand Touring
2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:08:39 AM
Page 270
© 2005 Mitchell Repair Information Company, LLC.
