Courtesy of MAZDA MOTORS CORP.
ENGINE FRONT COVER & NO.3 ENGINE MOUNT BRACKET INSTALLATION NOTE
1. Apply the silicon sealant (Loctite 5900) to the engine front cover shown in the figure.
Silicon sealant thickness
A: 5.0-6.0 mm {0.197-0.236 in}
B: 2.5-3.5 mm {0.099-0.137 in}
2. Install the engine front cover and No.3 engine mount bracket.
1. Tighten the engine front cover and No.3 engine mount bracket installation bolts in 4 steps in the
order shown in the figure.
Fig. 64: Identifying Engine Front Cover Sealant Area
Courtesy of MAZDA MOTORS CORP.
Tightening Torque
TIGHTENING TORQUE SPECIFICATION
CAUTION:
z
Install the engine front cover and No.3 engine mount
bracket installation bolts within 10 min of applying the
silicone sealant.
Step Installation position
Tightening torque
1
1-6
10 N.m {102 kgf.cm, 89 in.lbf}
2
7-9
15 N.m {1.5 kgf.m, 11 ft.lbf}
3
1-6
20-28 N.m {2.1-2.8 kgf.m, 15-20 ft.lbf}
4
7-9
70-80 N.m {7.2-8.1 kgf.m, 52-59 ft.lbf}
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:01:57 AM
Page 44
© 2005 Mitchell Repair Information Company, LLC.
