Fig. 173: Identifying C2 Clutch Component Disassembly
Courtesy of MAZDA MOTORS CORP.
Disassembly Procedure
1. Remove the thrust bearing from the intermediate shaft.
Fig. 174: Identifying Thrust Bearing Of Intermediate Shaft
Courtesy of MAZDA MOTORS CORP.
2. Using a flathead screwdriver, remove the snap ring from the intermediate shaft.
Fig. 175: Removing Snap Ring From Intermediate Shaft
Courtesy of MAZDA MOTORS CORP.
3. Remove the retaining plate, drive and driven plates from the intermediate shaft.
NOTE:
z
If the bearing is difficult to remove, blow air between the bearing and
the intermediate shaft.
NOTE:
z
Inspect the number of drive and driven plates.
2008 Mazda CX-9 Grand Touring
2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Microsoft
Sunday, November 15, 2009 10:28:16 AM
Page 92
© 2005 Mitchell Repair Information Company, LLC.
