Procedure
Fig. 100: Additional Key Registration Procedure
Courtesy of MAZDA MOTORS CORP.
1. Have one key (key 3) ready for registration.
2. Using key 1, turn the ignition switch to the ON position.
3. Verify that the security light illuminates for
approx. 3 s
and then goes out.
4. Using key 1, turn the ignition switch to the LOCK position
within approx. 4 s
after the security light
goes out.
5. Remove key 1
6. Repeat Steps 2-5 using key 2.
7. Repeat Steps 2-5 using key 3.
8. If additional keys need to be registered, repeat Steps 2-5 in the same manner as key 4.
9. Verify that the all keys can start the engine for
5 s or more
after the procedure.
NO.2 ADDITIONAL KEY REGISTRATION PROCEDURE (USING THE M-MDS)
Conditions
z
Customer has only one valid key. Or customer has no valid keys. (Can also be performed even if there are
two or more valid keys)
first be cleared. To clear the key ID numbers, refer to " NO.3 KEY
REPLACEMENT PROCEDURE (CLEARING PREVIOUSLY
PROGRAMMED KEY ID NUMBERS, KEY RE-PROGRAM)".
NOTE:
z
A maximum of eight keys can be registered for any one vehicle. If key
registration is not successful and DTC 15 appears even though the
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:59 AM
Page 85
© 2005 Mitchell Repair Information Company, LLC.
