3. Connect the positive lead of the tester to the positive side of each filament and the negative lead to
ground.
4. Gradually slide the positive lead from the positive side to the negative side and verify that the voltage
decreases accordingly.
z
If the voltage changes rapidly, the filament has a malfunction. Repair the filament.
VOLTAGE SPECIFICATION
Fig. 60: Connecting Positive Lead Of Tester To Positive Side Of Filament & Negative Lead To
Ground
Courtesy of MAZDA MOTORS CORP.
FILAMENT REPAIR
1. Clean the filament using isopropyl alcohol.
2. Attach tape to both sides of the filament.
3. Using a small brush or marking pen, apply silver paint.
4. After
2-3 min
, carefully remove the tape without damaging the applied area.
Fig. 59: Checking Rear Window Defroster Filament
Courtesy of MAZDA MOTORS CORP.
Measured part Voltage (Reference)
(1) to (2)
Approx. 11 V to 0 V
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:36:17 AM
Page 42
© 2005 Mitchell Repair Information Company, LLC.
