Courtesy of MAZDA MOTORS CORP.
1. Connect the M-MDS to the DLC-2. (See
M-MDS CONNECTING PROCEDURE
.)
2. Using the key 1, turn the ignition switch to the ON position.
3. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
Select "Body".
Select "Security".
z
When using the PDS (Pocket PC)
Select "Programming".
4. Then, select items from the screen menu in the following order.
1. Select "PATS Functions".
5. Select "Parameter Reset" from the M-MDS screen menu and perform the procedure according to the M-
MDS screen
6. Perform the security access according to the directions on the M-MDS screen. (See
SECURITY
ACCESS PROCEDURE
.)
7. Select the replaced parts according to the directions on the M-MDS.
z
If the PCM is replaced: Select "PCM".
8. After verifying that the PATS function menu is displayed again on the M-MDS screen, select "Exit (From
This Menu)" to finish the M-MDS procedure.
9. After Step 8, wait 5 s or more and then turn the ignition switch to the LOCK position.
10. Disconnect the M-MDS from the DLC-2.
11. Using key 1, turn the ignition switch to the ON position.
12. Verify that the security light illuminates for approx. 3 s and then turns off.
13. After verifying that the security light turns off, turn the ignition switch to the LOCK position.
14. Verify that the all keys can start the engine for
5 s or more
after the procedure.
NO.7 RESETTING PROCEDURE FOR THE IMMOBILIZER SYSTEM WHEN REPLACING THE
PCM AND INSTRUMENT CLUSTER AT THE SAME TIME
Conditions
z
Have two or more keys to be programmed after the key ID number clearing.
NOTE:
z
Although the security light remains illuminated and DTC 23 is
displayed after approx. 1 min, this does not indicate an improper
procedure. Continue to perform the procedure as indicated.
NOTE:
z
At this time, do not select the other parts from the M-MDS menu.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:59 AM
Page 92
© 2005 Mitchell Repair Information Company, LLC.