Plate thickness: 1 mm {0.04 in} or more
Fig. 37: Pressing Bearing Outer Race
Courtesy of MAZDA MOTORS CORP.
SPACER, BEARING INNER RACE ASSEMBLY NOTE
Pinion height adjustment
1. Assemble the spacer, the bearing inner race (rear bearing), and the
SST
O-ring to the
SST
(49 8531 565)
as shown in the figure.
2. Insert the set assembled in Step 1 to the differential gear from the rear.
3. Assemble the bearing inner race (front bearing),
SST
(49 G027 005), companion flange, washer, and
locknut from the front of the differential gear.
4. Tighten the locknut to the extent that the
SST
(49 8531 565) can be turned by hand.
5. Place the
SST
(49 0305 555) on top of the
SST
(49 8531 565).
NOTE:
z
Use the same spacer.
z
Install the spacer with the chamfer on the SST side.
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Differential - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:52:15 AM
Page 23
© 2005 Mitchell Repair Information Company, LLC.
