Fig. 2: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
z
If any DTCs are displayed, perform troubleshooting according to the corresponding DTC
inspection.
4. After completion of repairs, clear all DTCs stored in the DSC/RSC. (See
CLEARING DTCS
PROCEDURES
.)
CLEARING DTCS PROCEDURES
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
1. Select "Self Test".
2. Select "Modules".
3. Select "ABS".
z
When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "ABS".
3. Select "Self Test".
3. Verify the DTC according to the directions on the screen.
4. Press the clear button on the DTC screen to clear the DTC.
5. Verify that no DTCs are displayed.
2008 Mazda CX-9 Grand Touring
2008 BRAKES On-Board Diagnostic (DSC/RSC) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:12 AM
Page 3
© 2005 Mitchell Repair Information Company, LLC.
