Fig. 99: Positioning Camshafts Onto Cylinder Head (LH)
Courtesy of MAZDA MOTORS CORP.
3. Install the LH bank camshaft caps and temporarily tighten the camshaft cap bolts evenly in the
order shown in several passes.
Tightening torque: 8.5-11.5 N-m {87-117 kgf-cm 76-101 in-lbf}
Fig. 100: Identifying Camshaft Cap Bolts Tightening Sequence
Courtesy of MAZDA MOTORS CORP.
4. Remove the retaining wire inserted into the camshaft timing chain tensioner (LH).
Fig. 101: Identifying Retaining Wire Into Camshaft Timing Chain Tensioner (LH)
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:01:57 AM
Page 64
© 2005 Mitchell Repair Information Company, LLC.
