1. Push the engine forward so that the front side of the transfer faces downward, then install the transfer.
2. Install the transfer installation bolts.
Tightening torque
90-100 N.m {9.2-10.1 kgf.m, 66.4-73.7 ft.lbf}
Fig. 13: Identifying Front Side Of Transfer Faces
Courtesy of MAZDA MOTORS CORP.
3. Install the No.1 engine mount bolt and nut.
Tightening torque
85.3-116.6 N.m {8.70-11.88 kgf.m, 63.0-85.9 ft.lbf}
Fig. 14: Identifying No.1 Engine Mount Bolt And Nut
Courtesy of MAZDA MOTORS CORP.
4. Rotate the front stabilizer to the rear to set it in its original position.
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLE Transfer - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:32:26 AM
Page 8
© 2005 Mitchell Repair Information Company, LLC.
