Fig. 180: Identifying O-Rings Of Intermediate Shaft
Courtesy of MAZDA MOTORS CORP.
C2 CLUTCH INSPECTION
1. Inspect the lining of all drive plates.
z
If the lining is flaking or has changed color, or if it is worn or the print mark is wearing away,
replace with a new drive plate. When replacing, inspect the contact surfaces between the retaining
plate, driven plate and drive plate. If they are scratched or have changed color, replace with new
parts.
Fig. 181: Inspecting Lining Of All Drive Plates
Courtesy of MAZDA MOTORS CORP.
2. Using vernier calipers, measure the free length of the piston return spring.
C2 clutch return spring free length
Standard: 14.02 mm {0.5520 in}
z
If it is less than the specification, replace the piston return spring with a new one.
NOTE:
z
Before replacing with new drive plates, soak them at least 2 h in ATF.
2008 Mazda CX-9 Grand Touring
2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Microsoft
Sunday, November 15, 2009 10:28:17 AM
Page 95
© 2005 Mitchell Repair Information Company, LLC.
