2. Select "RCM".
3. Select "Self Test".
3. Verify the DTC according to the directions on the screen.
4. Press the clear button on the DTC screen to clear the DTC.
5. Verify that no DTCs are displayed.
Fig. 4: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
DTC TABLE
z
DTCs are common for present and past malfunction diagnosis.
DTC TABLE
DTC CHART
NOTE:
z
When DTCs not shown in the DTC table are displayed, replace the
SAS control module.
z
If the air bag system warning light does not illuminate or remains
illuminated when the ignition switch is turned to the ON position,
inspect and repair the air bag system warning light circuit, and then
confirm that the air bag system warning light is operational.
z
The air bag system warning light flashes the DTC pattern for five
cycles, and then remains illuminated until the ignition switch is
turned to the ACC or LOCK position.
DTC
System malfunction
location
Page
M-MDS
display
Air bag system warning light
Flashing pattern
Priority
ranking
B1013 16
20
Seat weight sensor
calibration error
(See
DTC B1013
.)
Driver-side curtain air bag
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:46 AM
Page 5
© 2005 Mitchell Repair Information Company, LLC.
