27. Verify that the security light and keyless warning light operate as follows:
z
From the point that ignition switch is turned to the ON position, the security light illuminates
for
approx. 3 s
, and goes out.
z
The keyless warning light illuminate when the ignition switch is turned to the ON position for
approx. 1 min
, and goes out.
28. After verifying that the keyless warning light goes out, turn the ignition switch to the LOCK position.
29. Verify that the all keys can start the engine for
5 s or more
after the procedure.
IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND
CLEARING [KEYLESS ENTRY SYSTEM]
FOREWORD
z
The immobilizer resetting procedure using the M-MDS must also always be performed when performing
the following procedure: "instrument cluster replacement", "PCM replacement", "instrument cluster and
PCM joint replacement", and "key ID number clearing". The engine will not start unless all work is
performed using the M-MDS.
z
For adding a key, there are two ways, either using the M-MDS or using two keys with which the engine
can be started.
z
When replacing any of the immobilizer system component parts, adding/clearing keys, or performing
other functions, refer to the following table and perform the applicable procedure (No.1 to 7).
IMMOBILIZER SYSTEM COMPONENT REPLACEMENT REFERENCE
z
Bring the card key into the vehicle.
Reference
number
Situation
Required items
Cautionary notes
1
Have two or more keys with which
the engine can be started, and
making a spare key, or programming
an additional key. (See
NO.1
ADDITIONAL KEY
REGISTRATION PROCEDURE
(USING TWO VALID KEYS
).)
z
Registration
key
z
The M-MDS is necessary
for the additional key
programming if "Customer
Spare Key Programming
Disable" is set before the
procedure using the M-
MDS. In this case, perform
No. 2.
2
If there is only one key that can start
the engine, make a spare key. If there
is no key, program an additional key.
(See
NO.2 ADDITIONAL KEY
REGISTRATION PROCEDURE
(USING THE M-MDS
).)
z
Registration
key
z
M-MDS
-
z
All the key ID numbers
programmed to the vehicle
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:59 AM
Page 80
© 2005 Mitchell Repair Information Company, LLC.
