Fig. 120: Identifying No.1 Engine Mount Bolt
Courtesy of MAZDA MOTORS CORP.
4. Temporarily tighten the No.3 engine mount bolt and nuts in the order shown in the figure.
Fig. 121: Identifying No.3 Engine Mount Bolt & Nuts Tightening Sequence
Courtesy of MAZDA MOTORS CORP.
5. Tighten the No.3 engine mount in the order shown in the figure.
Tightening Torque
TIGHTENING TORQUE SPECIFICATION
Fig. 122: Identifying No.3 Engine Mount Bolt & Nuts Tightening Sequence
Courtesy of MAZDA MOTORS CORP.
6. Remove the
SST (49 C017 5A0).
7. Install the following parts.
1. Install the front cooler pipe installation bolt.
Installation Position
Tightening Torque
1, 2, 7
74.5-104.9 N.m {7.60-10.6 kgf.m, 55.0-77.3 ft.lbf}
3, 4, 5, 6
43.1-74 N.m {4.40-7.54 kgf.m, 31.8-54.5 ft.lbf}
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:01:57 AM
Page 75
© 2005 Mitchell Repair Information Company, LLC.
