Mazda CX-9 Grand Touring 2008, Руководство пользователя

Страница: 23 / 2589

{
RES_SAB_D
z
Is the resistance of the driver-side side air bag
module normal?
{
Resistance: 1.0-9.7 ohms
No Go to the next step.
2
INSPECT DRIVER-SIDE SIDE AIR BAG
MODULE CONNECTOR
z
Turn the ignition switch to the LOCK position.
z
Disconnect the negative battery cable and wait
for 1 min or more .
z
Disconnect the driver-side side air bag module
connector. (See
SIDE AIR BAG MODULE
REMOVAL/INSTALLATION .)
z
Is there any malfunction of the driver-side side
air bag module connector?
WARNING:
z
Handling the air bag system components
improperly can accidentally deploy the air
bag modules and pre-tensioner seat belts,
which may seriously injure you. Read the
service warnings and cautions before
handling the air bag system components.
(See AIR BAG SYSTEM SERVICE
WARNINGS .)
(See AIR BAG SYSTEM SERVICE
CAUTIONS .)
Yes Replace the air bag wiring harness.
No Go to the next step.
3
VERIFY WHETHER MALFUNCTION IS IN
DRIVER-SIDE SIDE AIR BAG MODULE OR
RELATED WIRING HARNESS
z
Connect the leads of the SST (Fuel and
thermometer checker) or apply 2-ohm
resistance to driver-side side air bag module
connector terminals A and B.
z
Set the resistance of the SST (Fuel and
thermometer checker) to the 2-ohm position.
z
Connect the negative battery cable.
z
Turn the ignition switch to the ON position.
z
Are DTCs B1047, B1992, B1993, B1994,
and/or B1995 indicated?
Yes Go to the next step.
No
Replace the driver-side side air bag
module. (See SIDE AIR BAG
MODULE
REMOVAL/INSTALLATION .)
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:46 AM Page 23 © 2005 Mitchell Repair Information Company, LLC.