INSTALLATION VISUAL INSPECTION
1. Inspect the following items:
z
If there is any malfunction, replace the applicable part.
1. Excessive play of the ABS wheel-speed sensor
2. Deformation of the ABS wheel-speed sensor
3. Deformation or damage of the ABS sensor rotor
CLEARANCE INSPECTION
1. Verify the clearance between the ABS sensor rotor and the ABS wheel-speed sensor.
z
If there is any malfunction, check for improper installation, and replace if necessary.
Clearance
z
0.95-1.75 mm {0.038-0.068 in}
Fig. 23: Identifying Clearance Between ABS Sensor Rotor & ABS Wheel-Speed Sensor
Courtesy of MAZDA MOTORS CORP.
SENSOR OUTPUT VALUE INSPECTION
1. Turn the ignition switch off.
2. Connect the M-MDS to the DLC-2.
3. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
1. Select "DataLogger".
2. Select "Modules".
3. Select "ABS".
z
When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "ABS".
2008 Mazda CX-9 Grand Touring
2008 BRAKES Dynamic Stability Control/Roll Stability Control - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:40:24 AM
Page 23
© 2005 Mitchell Repair Information Company, LLC.
