DIAGNOSTIC PROCEDURE
NO.5 DOOR GLASS STOPS BEFORE FULLY OPENING/CLOSING [POWER
WINDOW SYSTEMS (EXTERIOR OPEN/CLOSE FUNCTION)]
POSSIBLE CAUSE CHART
DIAGNOSTIC PROCEDURE
Step
Inspection
Action
1
z
Inspect the door glass operation by
operating the power window
subswitch (passenger side).
z
Does it operate normally?
Yes Go to the next step.
No
Inspect the following parts, and repair or replace.
z
Power window subswitch (passenger side)
(See
POWER WINDOW SUBSWITCH
INSPECTION
.)
z
Power window motor
(See
POWER WINDOW MOTOR
INSPECTION
.)
z
Battery (low voltage)
2
z
Inspect the door glass operation by
operating the power window
subswitch (passenger side).
z
Does it operate in auto?
Yes
Inspect the wiring harness between the power
window main switch and the power window
subswitch (passenger side).
If there is any malfunction, repair or replace the
applicable part.
No
Perform the power window initialization procedure.
(See
POWER WINDOW INITIALIZATION
PROCEDURE
.)
5
DOOR GLASS STOPS BEFORE FULLY OPENING/CLOSING
POSSIBLE
CAUSE
z
Power window main switch malfunction
z
Power window subswitch (passenger side) malfunction
z
Power window motor malfunction
z
Battery malfunction (low voltage)
z
Door glass improper installation
z
Power window initialization procedure error
z
Keyless control module malfunction
z
BCM malfunction
z
Keyless entry system signal reception error (outside operation area, radio
signal interference)
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Symptom Troubleshooting [Power Window System (Exterior Open/Close Function)] -
Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:37:40 AM
Page 7
© 2005 Mitchell Repair Information Company, LLC.