Mazda CX-9 Grand Touring 2008, Руководство пользователя

Страница: 2036 / 2589

4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
„
Select "Body".
„
Select "Security".
z
When using the PDS (Pocket PC)
„
Select "Programming".
5. Then, select items from the screen menu in the following order.
z
Select "PATS Functions".
6. Select "Ignition Key Code Erase" from the M-MDS screen menu and perform the procedure according to
the M-MDS screen
7. Perform the security access according to the directions on the M-MDS screen. (See SECURITY
ACCESS PROCEDURE .)
8. After verifying that the PATS function menu is displayed again on the M-MDS screen, select "Exit (From
This Menu)" to finish the M-MDS procedure.
9. After Step 8, wait 5 s or more and then turn the ignition switch to the ON position.
10. Ignition switch to the LOCK position.
11. Disconnect the M-MDS from the DLC-2.
12. Using key 1, turn the ignition switch to the ON position.
13. After verifying that the security light and keyless warning light illuminate for
3 s or more , turn the
ignition switch to the LOCK position and remove key 1.
14. Using key 2, turn the ignition switch to the ON position.
15. Verify that the security light and keyless warning light illuminate
for approx. 3 s , and then goes out.
16. After verifying that the security light goes out, turn the ignition switch to the LOCK position using key 2,
and then remove key 2.
17. If programming one more keys, repeat Steps 14 to 16 with a key to be programmed as key 3. If the
vehicle is left with the ignition switch in the ON position for 1 min or more, additional key programming
according to Steps 14 to 16 is disabled. If this occurs, refer to the "
NO.1 ADDITIONAL KEY
PROGRAMMING PROCEDURE (USING TWO VALID KEYS) " to program any additional keys.
(See NO.1 ADDITIONAL KEY PROGRAMMING PROCEDURE (USING TWO VALID KEYS ).)
CAUTION:
z
The M-MDS displays "You must now program a minimum of two
keys.", however, do not perform the key programming and
proceed to Step 7. If the procedure is not followed, the engine
may not be started. The key programming procedure is
performed at Steps 12 to 17.
NOTE:
z
Although the security light remains illuminated and DTC 21 is
displayed after approx. 1 min, this does not indicate an improper
procedure. Continue to perform the procedure as indicated.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:59 AM Page 66 © 2005 Mitchell Repair Information Company, LLC.