DIAGNOSTIC PROCEDURE
DTC B104C, B104F, B1050, U2018 DIAGNOSTIC PROCEDURE
DETECTION
CONDITION
z
Malfunction in wiring harness between passenger-side side air bag sensor No.1 and
SAS control module
z
Malfunction in passenger-side side air bag sensor No.1 circuit
z
Detection conditions are for understanding the DTC outline before performing an
inspection. Performing an inspection according to only the detection conditions
may cause injury due to an operating error, or damage the system. When
performing an inspection, always follow the inspection procedure.
POSSIBLE
CAUSE
z
Open or short circuit in wiring harness between passenger-side side air bag sensor
No.1 and SAS control module
z
Passenger-side side air bag sensor No.1 malfunction
z
SAS control module malfunction
STEP
INSPECTION
ACTION
INSPECT PASSENGER-SIDE SIDE AIR BAG
SENSOR NO.1 CONNECTOR
WARNING:
z
Handling the air bag system components
improperly can accidentally deploy the air
bag modules and pre-tensioner seat belts,
which may seriously injure you. Read the
service warnings and cautions before
handling the air bag system components.
(See AIR BAG SYSTEM SERVICE
Yes Replace the air bag wiring harness.
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:46 AM
Page 35
© 2005 Mitchell Repair Information Company, LLC.
