Fig. 51: Connecting SSTs (Deployment Tool) To SSTs (Adapter Harness)
Courtesy of MAZDA MOTORS CORP.
10. Press the activation switch on the
SST (Deployment tool)
connected with
49 L066 002 (a yellow
connector)
of the
SST (Adapter harness)
, and
after 3 s
, press the activation switch on other
SST
(Deployment tool)
to operate (deploy) the air bag module (both inflators).
Fig. 52: Identifying Activation Switch
Courtesy of MAZDA MOTORS CORP.
11. Disconnect the
SSTs (Deployment tool)
from the
SSTs (Adapter harness)
.
WARNING:
z
Verify that air bag module operation (explosive) sound occurs
twice. If no operation (explosive) sound was heard or a single
operation (explosive) sound was heard, both inflators would
not have operated (deployed) properly. This may cause serious
injury if the air bag module operates (deploy) unexpectedly. If
the two operation (explosive) sounds are not heard, perform
Step 8 again. If a total of two operation (explosive) sounds
cannot be verified even though Step 8 is performed again,
leave the air bag module alone for 30 min or more before
approaching it again.
z
The air bag module is very hot immediately after it is operated
(deployed). You can be burned. Do not touch the air bag
module for at least 15 min after deployment.
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS Air Bag System - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:16:38 AM
Page 37
© 2005 Mitchell Repair Information Company, LLC.
