1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
1. Select "Self Test".
2. Select "Modules".
3. Select "LTM".
z
When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "LTM".
3. Select "Self Test".
3. Verify the DTC according to the directions on the screen.
z
If any DTCs are displayed, perform troubleshooting according to the corresponding DTC
inspection.
Fig. 2: Identifying DLC-2 Location
Courtesy of MAZDA MOTORS CORP.
4. After completion of repairs, clear all DTCs stored in the PLG control module. (See
CLEARING DTC
[POWER LIFTGATE (PLG) SYSTEM]
.)
DTC TABLE [POWER LIFTGATE (PLG) SYSTEM]
DTC CHART
CAUTION:
z
Some of the PLG system DTCs cannot be stored unless the PLG
system is operated. Therefore, always operate the PLG system before
performing the DTC inspection.
DTC
Description
Page
B1311
Door lock-link switch
circuit (unlock) failure
(See
DTC B1311 [POWER LIFTGATE (PLG) SYSTEM]
.)
B1318 Power supply voltage
decreases
(See
DTC B1318 [POWER LIFTGATE (PLG) SYSTEM]
.)
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES On-Board Diagnostic (Power Liftgate (PLG) System) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:46:08 AM
Page 2
© 2005 Mitchell Repair Information Company, LLC.
