DTC B1059, B2229, B2231, B2233, B2235
DTC B1059, B2229, B2231, B2233, B2235 DETECTION CONDITION AND POSSIBLE CAUSE
module terminal 1Q and clock spring terminal
1B, SAS control module terminal 1U and clock
spring terminal 1A for the following:
{
Short to ground
{
Short to power supply
{
Open circuit
z
Is the wiring harness normal?
No
Replace the air bag wiring harness.
DTC
B1059 Passenger-side air bag module (inflator No.2) and other air bag module circuits short
B2229 Passenger-side air bag module (inflator No.2) circuit short to body ground
B2231 Passenger-side air bag module (inflator No.2) circuit short to power supply
B2233 Passenger-side air bag module (inflator No.2) circuit resistance high
B2235 Passenger-side air bag module (inflator No.2) circuit resistance low
DETECTION
CONDITION
z
Resistance other than
1.0-9.7 ohms
detected in passenger-side side air bag module
circuit
z
Malfunction in wiring harness between passenger-side air bag module (inflator No.2)
and SAS control module
WARNING:
z
Detection conditions are for understanding the DTC outline before performing an
inspection. Performing an inspection according to only the detection conditions
may cause injury due to an operating error, or damage the system. When
performing an inspection, always follow the inspection procedure.
POSSIBLE
CAUSE
z
Open or short circuit in wiring harness between passenger-side air bag module
(inflator No.2) and SAS control module
z
Passenger-side air bag module malfunction
z
SAS control module malfunction
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:47 AM
Page 57
© 2005 Mitchell Repair Information Company, LLC.
