66. Inspect the lining of all drive plates.
z
If the lining is flaking or has changed color, or if it is worn or the print mark is wearing away,
replace with a new drive plate. When replacing, inspect the contact surfaces between the retaining
plate, driven plate and drive plate. If they are scratched or have changed color, replace with new
parts.
67. Remove the C2 clutch component and the thrust bearing.
Fig. 67: Identifying C2 Clutch Component And Thrust Bearing
Courtesy of MAZDA MOTORS CORP.
68. Remove the seal rings from the transaxle case.
NOTE:
z
Before replacing with new drive plates, soak them at least 2 h in ATF.
Fig. 66: Inspecting Print Mark Of All Drive Plates
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Microsoft
Sunday, November 15, 2009 10:28:16 AM
Page 34
© 2005 Mitchell Repair Information Company, LLC.
