Fig. 6: Identifying Key Reminder Switch And Steering Lock
Courtesy of MAZDA MOTORS CORP.
KEY REMINDER SWITCH INSPECTION
1. Disconnect the negative battery cable.
2. Remove the column cover. (See
COLUMN COVER REMOVAL/INSTALLATION
.)
3. Disconnect the key reminder switch connector.
4. Inspect for continuity between the key reminder switch terminals using a tester.
z
If there is any malfunction, replace the key reminder switch.
Fig. 7: Key Reminder Switch Terminals Continuity Chart
Courtesy of MAZDA MOTORS CORP.
Fig. 8: Identifying Key Reminder Switch Terminals
Courtesy of MAZDA MOTORS CORP.
STEERING LOCK UNIT INSPECTION
1. Measure the voltage at each terminal is as indicated in the Terminal Voltage Tables.
z
If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under
"Inspection item(s)" and related wiring harnesses.
2. If the system does not work properly even though the inspection items or related wiring harnesses do not
have any malfunction, replace the steering look unit.
TERMINAL VOLTAGE TABLE (REFERENCE)
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Power Systems - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:41:28 AM
Page 4
© 2005 Mitchell Repair Information Company, LLC.
