Fig. 29: Locating Alignment Marks On Camshaft Timing Chain (LH)
Courtesy of MAZDA MOTORS CORP.
3. Remove the retaining wire inserted into the camshaft timing chain tensioner (RH).
4. Tighten the new camshaft sprocket (RH) installation bolts using the following 4 steps.
1. Tighten to
40 N.m {4.1 kgf.m, 30 ft.lbf}.
2. Loosen
360 °
(one full turn) in reverse order.
3. Tighten to
10 N.m {102 kgf.cm, 89 in.lbf}.
4. Tighten to
90 °
5. Install the variable valve timing actuator, camshaft timing chain and the exhaust camshaft sprocket of the
LH bank as a single unit.
Fig. 30: Locating Retaining Wire Into Camshaft Timing Chain Tensioner
Courtesy of MAZDA MOTORS CORP.
6. Remove the retaining wire inserted into the camshaft timing chain tensioner (LH).
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:01:57 AM
Page 23
© 2005 Mitchell Repair Information Company, LLC.
