Fig. 108: Identifying Front Cooler Pipe & Bolt
Courtesy of MAZDA MOTORS CORP.
1. Install the right rear shaft of the SST to the bolt of the right shock absorber shown in the figure.
2. Install the left rear shaft of the SST to the bolt of the left shock absorber (Identical position to the
right side).
CAUTION:
z
Refer to the SST instruction manual for the basic handing
procedure.
NOTE:
z
When installing the SST, adjust the position of each shaft so that
they do not interfere with the vehicle body.
Fig. 109: Identifying Main Frame, Rear Shaft, Side Bar & Front Shaft
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:01:57 AM
Page 69
© 2005 Mitchell Repair Information Company, LLC.
