3. Cover the disconnected quick release connector and fuel pipe with vinyl sheeting or a similar material to
prevent it from scratches or dirt.
Fig. 29: Identifying Quick Release Connector And Retainer
Courtesy of MAZDA MOTORS CORP.
TYPE B REMOVAL NOTE
1. Push the retainer.
2. Pull the connector side and disconnect the quick release connector.
3. Cover the disconnected quick release connector and fuel pipe with vinyl sheeting or a similar material to
prevent it from scratches or dirt.
Fig. 30: Identifying Quick Release Connector And Retainer
Courtesy of MAZDA MOTORS CORP.
NOTE:
z
If the quick release connector is removed, replace the retainer with a new
one.
NOTE:
z
The quick release connector can be removed by pushing the center
of the retainer tabs.
z
The retainer is attached to the pipe even after the connector is
disconnected.
2008 Mazda CX-9 Grand Touring
2008 ENGINE PERFORMANCE Emission System (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:04:04 AM
Page 22
© 2005 Mitchell Repair Information Company, LLC.
