recorded?
order, then go to the next step.
2
VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
z
Verify related Service Bulletins and/or
on-line repair information availability.
z
Is any related Service Bulletins
available?
Yes
Perform repair or diagnosis according to the
available Service Bulletins.
z
If the vehicle is not repaired, go to the
next step.
No
Go to the next step.
3
INSPECT DRIVE BELT DAMAGED
z
Verify inspect the drive belt for
damage.
z
Is the drive belt normal?
Yes Go to the next step.
No Replace the drive belt, then go to Step 10. (See
DRIVE BELT INSPECTION [MZI-3.7]
.)
4
INSPECT GENERATOR TERMINAL
FOR POOR INSTALLATION
z
Turn the engine switch off.
z
Inspect generator terminal B for
looseness.
z
Are there any malfunction?
Yes
Connect generator terminal B correctly, then go
to Step 10.
No
Go to the next step.
5
INSPECT GENERATOR CIRCUIT FOR
SHORT TO GROUND
z
Inspect for continuity between the
following terminal:
{
Generator terminal RC (wiring
harness-side) and body ground.
{
Generator terminal LI (wiring
harness-side) and body ground.
z
Are there continuity?
Yes
Repair or replace suspected part, then go to
Step 10.
No
Go to the next step.
6
INSPECT BATTERY POSITIVE
TERMINAL FOR POOR
INSTALLATION
z
Turn the engine switch off.
z
Inspect the battery positive terminal for
looseness.
z
Is there any malfunction?
Yes
Connect the battery positive terminal correctly,
then go to Step 10.
No
Go to the next step.
7
INSPECT GENERATOR CIRCUIT FOR
OPEN CIRCUIT
z
Inspect the continuity between
generator terminal B (wiring harness-
side) and battery positive terminal
Yes Go to the next step.
Repair or replace suspected part, then go to
2008 Mazda CX-9 Grand Touring
2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:08:40 AM
Page 286
© 2005 Mitchell Repair Information Company, LLC.
