Fig. 191: Identifying Thrust Bearing Of Intermediate Shaft
Courtesy of MAZDA MOTORS CORP.
13. Install the intermediate shaft on the transaxle case and set a dial indicator as shown in the figure.
14. Apply compressed air as shown in the figure and measure the C2 clutch piston stroke.
Air pressure
400 kPa {4.1 kgfcm
2
, 58 psi}
C2 clutch piston stroke
0.45 - 0.65 mm {0.0178 - 0.0255 in}
z
If not within the specification, select an appropriate retaining plate.
Fig. 192: Measuring C2 Clutch Piston Stroke
Courtesy of MAZDA MOTORS CORP.
RETAINING PLATE SIZE
Identification mark
Thickness (mm {in})
1
2.5 {0.0984}
2
2.6 {0.102}
3
2.7 {0.106}
4
2.8 {0.110}
2008 Mazda CX-9 Grand Touring
2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Microsoft
Sunday, November 15, 2009 10:28:17 AM
Page 102
© 2005 Mitchell Repair Information Company, LLC.
